Untitled Document




 


Results 1 to 4 of 4

Thread: Two Threaded Props f/s

  1. #1
    Junior Member
    Join Date
    Jan 2012
    Location
    South, MS
    Age
    46
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Two Threaded Props f/s

    I have a threaded BB that measures 12 1/8, also a threaded 11x10 both are in good shape. $ 75.00 each + shipping I also have parts for a 36" hyper-drive. Everything but the outdrive tube is in good condition. I just replaced the seal cap and prop sleeve nut. If you need misc. parts make an offer. Contact me at 228-697-2115

  2. #2
    Junior Member
    Join Date
    Dec 2011
    Location
    NW Ga
    Posts
    18
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Two Threaded Props f/s

    When you say parts for 36" hyper, what parts does this consist of ? What is wrong with the outdrive tube ?

    Thanks
    Kevin

  3. #3
    Senior Member quackerattacker's Avatar
    Join Date
    Feb 2012
    Location
    Michigan
    Posts
    314
    Thanks
    0
    Thanked 8 Times in 1 Post

    Default Re: Two Threaded Props f/s

    Would you be interested in a trade for a 3/4 hex mount blade that measures about the same? If so let me know and i'll measure it up and send some pics if you want. The prop has some sand cupping on the edges and is a bit worn. I got it in a package deal with a carb and a cross over.
    Todd
    "The Swamp fox" A 1650 all welded being dangerously skipped by a 35 HD, 36" outdrive BPS duals and a single 42mm Mikuni................rebuilt at 18.5 hours do to the sinking of the;

    K/V SWAMPFOX

    Quacker Attacker
    Championship Calls
    Est '85

  4. #4
    Junior Member
    Join Date
    Jan 2012
    Location
    South, MS
    Age
    46
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Two Threaded Props f/s

    Quote Originally Posted by kscoggins View Post
    When you say parts for 36" hyper, what parts does this consist of ? What is wrong with the outdrive tube ?

    Thanks
    Kevin
    The outdrive tube has a hair line crack about 3/4" from the drive housing. I replaced it with a 40" drive instead of welding it. Everything else is in great shape, I just replaced the seals on both ends, and the prop sleeve nut.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •