Minimum width requirements

Swilli1054 · 06-13-2008, 08:15 AM

I am running a 1636 and I am wondering if the shaggy has a minimum width requirement. If I correctly understood the drawing at the bottom of the page it would appear to need 50 inches. Also if that is true..how adaptable is the frame?

***sandman7655*** · 06-13-2008, 03:04 PM

i would think you could modify it to work fine.

deadbird8 · 06-13-2008, 06:19 PM

Attach it on the frame further down the sheet so the bottom hangs at about the water line. Then use the area left over at the top on both sides to cover the slit.

**Cajun_in_GA** · 06-13-2008, 08:03 PM

take a measurement across your gunwales. If you boat is a 1636 it should not be 36 across the top I would not think.

06-13-2008, 08:15 AM	#1 (permalink)
Swilli1054 Junior Member Join Date: Apr 2008 Location: Tallahassee Age: 47 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Minimum width requirements I am running a 1636 and I am wondering if the shaggy has a minimum width requirement. If I correctly understood the drawing at the bottom of the page it would appear to need 50 inches. Also if that is true..how adaptable is the frame?

06-13-2008, 03:04 PM	#2 (permalink)
*sandman7655* Administrator Join Date: Mar 2006 Location: south carolina Age: 36 Posts: 3,777 Thanks: 25 Thanked 0 Times in 0 Posts	Re: Minimum width requirements i would think you could modify it to work fine. __________________ UPSTATE CAROLINA MUDBUDDY MUDBUDDY complete line BPS PERFORMANCE CERTIFIED CENTER GATORTRAX BOATS triton boats g3 boats 803-981-MUUD 803-242-1333

06-13-2008, 06:19 PM	#3 (permalink)
deadbird8 Senior Member Join Date: Mar 2007 Location: Dallas, TX Age: 45 Posts: 1,224 Thanks: 3 Thanked 8 Times in 3 Posts	Re: Minimum width requirements Attach it on the frame further down the sheet so the bottom hangs at about the water line. Then use the area left over at the top on both sides to cover the slit. __________________ Excel 1754 Midwest trying to outrun the 35 Hypersport

06-13-2008, 08:03 PM	#4 (permalink)
Cajun_in_GA Senior Member Join Date: May 2006 Location: Canton, GA Posts: 3,360 Thanks: 1 Thanked 9 Times in 4 Posts	Re: Minimum width requirements take a measurement across your gunwales. If you boat is a 1636 it should not be 36 across the top I would not think. __________________ Southern Backwater Marine Featuring: Mud Buddy Motors and Accessories BPS Performance Certified Center Gator Trax Boats and Accessories Magic Tilt and Mcclain Trailers Briggs and Stratton parts and supplies (770)-827-7078 clecompte@windstream.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)