Caution using Mobil One oil?

willydiver · 02-28-2008, 08:44 AM

I heard from a gentleman that he has witnessed Mobil One oil soaking completely through a Briggs block. It sounded crazy to me, but has anyone else heard of certain oils soaking through aluminum castings?
WD

***admin-Jon*** · 02-28-2008, 09:04 AM

I have used mobel one syn. since the start and have 80hrs on motor no problems here

HaydenHunter · 02-28-2008, 09:08 AM

We have run Mobil 1 in all the Hypers we have owned or serviced. Haven't seen that "phenomenon" yet.

Was he pulling your leg?

**BoatDR** · 02-28-2008, 09:16 AM

I've heard of some oil additives that will weaken certain types of gasket material, but never heard of any type of liquid that could bleed thru aluminum.

willydiver · 02-28-2008, 10:51 AM

Yep, I thought it sounded crazy, too. I knew if there were any truth in it, you guys would know.

Hope I didn't start a hysteria...... Mobil ONE IS PEOPLE!!!

**Cajun_in_GA** · 02-28-2008, 10:54 AM

this needs to go to mythbusters. lol

***sandman7655*** · 02-28-2008, 11:06 AM

no problems here.

BUCKWILD · 02-29-2008, 07:07 PM

If it was leaking through the engine block there had to be a casting flaw.

weathers1200 · 03-04-2008, 06:30 PM

I have used it since break in four years ago, no problem. I did have a comment from my high performance cam builder. He does not recommend any synthetic oils with high profile cams! He claims he sees more wear than with a high quality mineral based racing oil. I don't have my modded motor on the water yet, so I can't confirm his claim, just passing it along.

djbmarshmaster · 03-30-2008, 09:51 PM

been using mobil one syn. for almost 2 years with no problems:banana:

02-28-2008, 08:44 AM	#1 (permalink)
willydiver Senior Member Join Date: Jul 2006 Location: Brunswick, GA Age: 35 Posts: 593 Thanks: 0 Thanked 0 Times in 0 Posts	Caution using Mobil One oil? I heard from a gentleman that he has witnessed Mobil One oil soaking completely through a Briggs block. It sounded crazy to me, but has anyone else heard of certain oils soaking through aluminum castings? WD __________________ 23 Mini on a 1436 Alumacraft (aka. The AlumaBeast)

02-28-2008, 09:04 AM	#2 (permalink)
*admin-Jon* Administrator Join Date: Feb 2006 Location: North East, Arkansas Posts: 3,566 Thanks: 5 Thanked 149 Times in 28 Posts	Re: Caution using Mobil One oil? I have used mobel one syn. since the start and have 80hrs on motor no problems here __________________ Jon Hicks North East Arkansas MudBuddy North Georgia MudBuddy North Georgia Backwater Motor Performance Center™ Twin Carb Certified 706-224-4388

02-28-2008, 09:08 AM	#3 (permalink)
HaydenHunter Senior Member Join Date: Mar 2006 Location: Hayden, Idaho Posts: 712 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Caution using Mobil One oil? We have run Mobil 1 in all the Hypers we have owned or serviced. Haven't seen that "phenomenon" yet. Was he pulling your leg?

02-28-2008, 09:16 AM	#4 (permalink)
BoatDR Senior Member Join Date: Mar 2006 Location: Metairie, LA Age: 35 Posts: 6,221 Thanks: 4 Thanked 24 Times in 6 Posts	Re: Caution using Mobil One oil? I've heard of some oil additives that will weaken certain types of gasket material, but never heard of any type of liquid that could bleed thru aluminum. __________________

02-28-2008, 10:51 AM	#5 (permalink)
willydiver Senior Member Join Date: Jul 2006 Location: Brunswick, GA Age: 35 Posts: 593 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Caution using Mobil One oil? Yep, I thought it sounded crazy, too. I knew if there were any truth in it, you guys would know. Hope I didn't start a hysteria...... Mobil ONE IS PEOPLE!!! __________________ 23 Mini on a 1436 Alumacraft (aka. The AlumaBeast)



** NEW MEMBERS YOUR ACCOUNT HAS TO BE VERIFIED BY A ADMIN WE CHECK 2 TIMES A WEEK. IF A WEEK HAS GONE BY YOU CAN EMAIL US AND CHECK ON YOUR STATUS.*********
QUICK LINKS

02-28-2008, 10:54 AM	#6 (permalink)
Cajun_in_GA Senior Member Join Date: May 2006 Location: Canton, GA Posts: 4,055 Thanks: 3 Thanked 11 Times in 5 Posts	Re: Caution using Mobil One oil? this needs to go to mythbusters. lol __________________ Southern Backwater Marine Featuring: Mud Buddy Motors and Accessories BPS Performance Certified Center Gator Trax Boats and Accessories Excel Boats and Accessories Magic Tilt and Mcclain Trailers Briggs and Stratton parts and supplies (770)-827-7078 clecompte@windstream.net

02-28-2008, 11:06 AM	#7 (permalink)
*sandman7655* Administrator Join Date: Mar 2006 Location: south carolina Age: 38 Posts: 4,627 Thanks: 61 Thanked 0 Times in 0 Posts	Re: Caution using Mobil One oil? no problems here. __________________ UPSTATE CAROLINA MUDBUDDY MUDBUDDY complete line BPS PERFORMANCE CERTIFIED CENTER GATORTRAX BOATS EXCEL BOATS 803-981-MUUD 803-242-1333

02-29-2008, 07:07 PM	#8 (permalink)
BUCKWILD Senior Member Join Date: Mar 2006 Location: Baton Rouge Age: 34 Posts: 432 Thanks: 0 Thanked 2 Times in 1 Post	Re: Caution using Mobil One oil? If it was leaking through the engine block there had to be a casting flaw. __________________ 1854 GATORTRAX *HD6000 PRO FLOW*

03-04-2008, 06:30 PM	#9 (permalink)
weathers1200 Senior Member Join Date: Apr 2006 Location: Lake Mary, Florida Age: 53 Posts: 1,531 Thanks: 10 Thanked 6 Times in 3 Posts	Re: Caution using Mobil One oil? I have used it since break in four years ago, no problem. I did have a comment from my high performance cam builder. He does not recommend any synthetic oils with high profile cams! He claims he sees more wear than with a high quality mineral based racing oil. I don't have my modded motor on the water yet, so I can't confirm his claim, just passing it along. __________________ Weathers1200 "Gear head" "Undertake not what you cannot perform, but be careful to keep your promise" George Washington 1746.

03-30-2008, 09:51 PM	#10 (permalink)
djbmarshmaster Junior Member Join Date: Nov 2007 Location: mobile al Age: 49 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Caution using Mobil One oil? been using mobil one syn. for almost 2 years with no problems:banana:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode