MudBuddy Forums - View Single Post

deadbird8 · 12-06-2008, 07:42 AM

3840 with no load could be on the low side. Go start it in the driveway, let it warm up and then mash the throttle and post the OOW RPM (i.e. where your govenor is set).

Is your trim bracket set correctly as I posted above? I ask because when I first put mine on the Excel I was one setting off on the trim bracket and it really affected my performance.

12-06-2008, 07:42 AM	#10 (permalink)
deadbird8 Senior Member Join Date: Mar 2007 Location: Dallas, TX Age: 46 Posts: 2,601 Thanks: 24 Thanked 16 Times in 6 Posts	Re: not getting correct speed 3840 with no load could be on the low side. Go start it in the driveway, let it warm up and then mash the throttle and post the OOW RPM (i.e. where your govenor is set). Is your trim bracket set correctly as I posted above? I ask because when I first put mine on the Excel I was one setting off on the trim bracket and it really affected my performance. __________________ Excel 1851 F4 w/ 35 CDI HS *"Official Supplier of the BoatDr Avitar"* Last edited by deadbird8; 12-06-2008 at 07:42 AM. Reason: because I can't spell