MudBuddy Forums - View Single Post

spoonylove · 03-07-2006, 11:07 AM

I took 2 pieces of aluminum and bent them like the letter C. I bolted them to the top of the boat under the gunnell with the open end facing the inside of the boat. I then drilled holes in each of them on the open end side. place your push pole into the holder and use d clips in the holes to hold it in. The clips i used are like the pins in a quick set blind. this works really good it keeps the pole off the floor and out of the way. Hope this works

Spoonylove

03-07-2006, 11:07 AM	#3 (permalink)
spoonylove Junior Member Join Date: Mar 2006 Location: Iowa Age: 31 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Push pole storage? I took 2 pieces of aluminum and bent them like the letter C. I bolted them to the top of the boat under the gunnell with the open end facing the inside of the boat. I then drilled holes in each of them on the open end side. place your push pole into the holder and use d clips in the holes to hold it in. The clips i used are like the pins in a quick set blind. this works really good it keeps the pole off the floor and out of the way. Hope this works Spoonylove