logo1
Mud Buddy Forum                                
logo2
       
logo3
Home
Latest News and Information
Hyper Sport Drive
HD 6000 Twin Carb
HD Lite
HD Hunter
Mini HD Lite
Longtail Mud Motors
Performance Kits
Performance Centers
Blinds
Gator Trax Boats
Excel Boats
Accessories
Demos and Festivals
Hyper Service Updates
Videos
Testimonials
Hyper Performance
Tiger Propellers
Hot New Prostaff Videos
Remote Steer
Customer Slide Show
Scratch and Dent
Customer Photos
Customer Page
Dealers Wanted
Dealer Page
Warranty
About Us
Contact Us
Order Now
Privacy
nav bottom
QuickFlip blind folds into a small package for trailering. The matching buckle closure cover keeps the blind bundled for storage and trailering.
 
 

Inside Blinds
Quick Flip Deluxe | Shaggy Pro Hunter | MB FastGrass Blind | Invisagrass

Quick Flip ™ Deluxe 

Introducing our best full-feature blind. This blind is built for serious duck hunters that demand maximum concealment while providing bow to transom boat coverage. The Quick Flip Deluxe sets up in seconds for full protection from the worst weather mother nature can dish out. Our exclusive and simple one-pole frame system is strong, easy to use and automatically adjusts to fit the width and length of your boat.

Note:  This blind shows four peek ports in rear.  This year's blind has two peek-ports in rear.

bullet   Three sizes to fit boats from 16-21'.
bullet   500 denier polyester wind and water resistant cover.
bullet   Enlarged 10' and 12' shooting openings this year.
bullet   Quick flip balanced full top with three-position adjustable top opening.
Can be opened fully, closed fully, or positions in between.
bullet   New 1' corrosion resistant frame with space-saving exclusive single-pole mounting.
bullet   Dog door for fido.
bullet   Fits V, modified V, or square front boats.
bullet   Two peek ports in rear.
bullet   Fowl weather top side flaps.
bullet   Full incorporated motor cover.
bullet   Automatically adjusts to the width of your boat.  Seals sides from wind.
bullet   Sides lift for easy entry and exit.
bullet   Custom mounting methods.
bullet   Raises in three minutes.
bullet   Folds to one side of the boat for easy storage and trailering.
    Travel cover included.

             

Our new Quick Flip blind frame is custom built for your boat. We have used the double front-and-rear crossbar system for years, but have found the crossbars take up too much floor space and get in the way when operating the new HyperDrive style motors and outboards.  Our solution, which uses a mix of three different types of mounts, allows you to measure your boat for the blind, then select which of the mounts you prefer for the front and rear.  The photo below shows one type using the rear post and front crossbar. 


_________________________________________

More on our futuristic blind frame design. 

The one-pole system is stronger, takes up less room, is easy to use and folds quickly to the side of the boat. The quick-flip top is adjustable with three positions, from completely closed to completely open. It also has three height adjustments in between. And when the season is over, just remove two bolts and the entire blind removes quickly for off-season storage.  Read on, there is more, much more.

__________________________________



Top view (shows frame folded down) with post and crossbar mounting options.

End view showing our one-pole frame system.  Its design adjusts to various size and width boats and folds down neatly to the side of any style boat, V, mod V, or square front. The telescoping pole design allows for many different top height and opening selections.

_____________________________________

Mount types:
You have your choice of any mount for the front or rear of the boat. 
See below.  Specify when ordering.

Post style:  Commonly used in back, but can also be cut down and used on the front deck as well.  The post base doubles as a seat mount when the blind is not being used.  

We now offer a conversion kit for all previous year model blinds that allows you to eliminate the crossbar and use this convenient post mount.  ($38.50 plus shipping.)

Deck Mount:  This is secured by screwing the mount to the front deck or the top of the rear bench seat.  Comes with four 1/4" self tapping screws.  During off season, simply remove the bolt and the blind quickly removes for storage.  This is our simplest, easy to install mount.

Crossbar Mount:  This is mostly used on the bow of the boat.  Its width is adjustable and the hooked ends clamp on the boat for easy removal.  The crossbar can be used in the rear of the boat, but it can interfere with mud motor operation.


_____________________________________

Simply the best pattern we know.

 

Mossy Oak Shadowgrass
click to enlarge
 

The quick-flip top folds back with the touch of your hand. The three-level adjustment frame allows you to select the opening size that best fits your hunting style, from full open, partially open to completely closed.  Additional opening heights are easily added by the customer.  The top may also be adjusted to close completely for overnight camping - a weatherproof tent and boat combined.



Large 10' and 12' opening lets you hunt from two to four hunters. (depending on size and model)

 

 

 

 

 


Note:  Blinds now have two large peek ports in rear, not four small holes as shown.

And, to keep an eye on the sky, we have added peek ports in the back of the blind.  Each has a Velcro closure flap to keep out rain and snow.

Our Mossy Oak Shadowgrass Quick Flip is shown

Our grassing straps make it easy to add vegetation to your blind for added concealment. Insert branches, burlap, Fastgrass strips, or whatever it takes to get those wings back and feet sticking out.

 

 

 

 

 

Two grassing straps are located on all four sides of the new blind.

Optional: The super tough and long-lasting new Invisagrass  (outer cover of palm leaves) is easy to attach to the grassing strips. The blind easily folds down with the Invisagrass and can be easily left on for two or three seasons.

Invisagrass is now available in green, brown or tan. One bundle will cover one side.  Some hunters prefer more coverage.  Invisagrass is treated for mildew protection and fireproofing. 


photo courtesy Toby - Refuge Gang
Click to enlarge.

   Invisagrass - $29 per bundle - a must have

  

 Shown here with strips of Fastgrass.

 

 

 

Blind folds down to the left. 

 

 

 

Every model is equipped with a full size dog door allowing Fido to get out when the shooting stops.  The opening is adjustable allowing him to see without being seen.

Also, optional motor cover shown.  Blind top can be placed over motors up to 225 horse. Motor cover is not necessary.

 

 

Mud Buddy,

You probably need to make me and honorary Mudbuddy pro staff, field tester or something!!

I found out the real worth of the quick flip on Saturday out on Merrymeeting bay in the rain for 4 hours. We were dry and warm the whole time!! The only leaks I had were where the flap straps were added when I sent it back for upgrading.. A little campdry will fix that. I was some impressed and the guy who was with me will be ordering on before next season after he tried mine!!

Sheplabs - Refuge Member

___________________________________

New Quick Flip Large Size for 19 - 21' boats.

Customer Testimonial and Blind Review
 

Blind Length Adjustment width Price
Large
 		 19 to 21 foot 70" to 102"
new 12' 2" shoot opening		 $949
Regular
wide/long		 17 to 18 foot 70" to 96"
new 12' 2" shoot opening		 $889
Regular 16 to 18 foot 60" to 75"
new 10' 2" shoot opening		 $819
$65 Shipping (2 boxes) Mountain and Pacific
$85 Central
$95 Eastern
New Features
- Heavy Duty 1" frame (single pole, faster design)
- 2 Grassing Straps Around Entire Blind
- Much Larger 10' and 12' Shooting Openings
- 4" Taller Quick Flip Top

Conversion Kit for 2004 models - Eliminates rear crossbar and adds new post mount which gives you much more room, especially with the new Hyper style short tails motors.  $38.50
Call 801.352.8011 for details and ordering.

Remember, when you order, specify what mount type
you want for the front and rear of your boat.

Video

     DSL, click to play, click to stop

    Dial Up, click to play, click to stop

___________________________________

Mounting Considerations
Read this before ordering so you fully understand how the blind mounts on your boat.  Print this and get into your boat.  This is a very helpful when selecting the mounts.

See the drawing (bottom-left).  Use these measuring points to decide where the blind will mount on your boat.  There is some flexibility.  For V-front boat, pick a spot from 37" to 47" from the bow of the boat. For square front boats, measure back from 27" to 37".  Then measure back 10'4" for the regular blind, of 12'4" for the reg wide, or large model blinds. Also note that the mounts are 37" from the passenger side of the boat.  This will ensure the blind fits along the top of your gunnel. 

Once you determine the mounting points, then select which mount is best for the front and back. 

The drawing (bottom-right) shows what the frame looks like when upright.  The blind folds to the left (passenger) side, away from the console or driver pod seat. The blind is held upright by a snap/buckle assembly.  In just minutes the blind folds up or down.  When trailering it takes about 5 minutes to install the trailering and storage cover.  When the season is over, it takes 10 minutes to remove or install the blind back on the boat.

visa.gif (6970 bytes)
 Order Now!
801.352.8011

Quick Flip is a trademark of Mud Buddy LLC
     
Copyright 2008  - Mud Buddy Outdoors          Privacy | Home | Contact | Order Now    801.352.8011