Sorry, we are not able to take Canadian Paypal
orders.
Here it is...
Mud Buddy Big Blade Propeller
This is the best propeller ever
made for a surface drive motor.
It was designed and built by Mud
Buddy owner Glenn Foreman
and Mercury engineers. It has exceptional hole shots, great top
end speeds and is surprisingly strong.
Great for larger boats and loads.
Patented
4mm cup for exceptional traction
in mud.
Less tiller torque.
Cupped on the trailing edge for
long life.
Propeller Type
Winch and Spotlight
Winch and Spotlight w/Cover
Winch and Spotlight with padded cover and velcro
closure.
New Winch Spot Light
Combination Kit
Getting stuck is not fun.
Seeing well during night driving is a pleasure.
1700 pound Warn winch with control, free spool and
in/out switch
50' of 3/16" cable and hook. We recommend
attaching a 50 to 100' heavy rope. 5' piece of chain (on the anchor) and
spade style anchor to the cable end. The longer the rope and heavier the
chain the better (the draw angle and weighted chain holds the anchor in
the mud.) Have someone stand on the anchor to hold in place if
possible.
Twin 130 watt hallogen spot lights
Spot light cross bar swivels up and down, making it
easy to adjust the lights when loads and drive angle changes.
Marine powder coat finish
Quarter inch aluminum mounting plate (you weld to
boat)
Spot light frame
Convenient light and winch cover, with velcro to keep
the front open when running the lights, straps and buckles underneath to
hold while trailering, and the cover has a padded front to keep rock
chips from breaking the spot lights.
Complete with hardware and instructions
This is the Warn 1700 pound winch that comes with this kit. The photos
below show a 1500 pound Warn winch.
Center light bar rotates on friction washers,
allowing the light angle to be easily changed without loosening the
mounting bolts
Marine powder coat with zinc undercoat base
Black powder coat light body
Bottom friction bar rotates for vertical adjustment
Lights mounted in rubber for long life
High amp easy install toggle switch included
$189
Spotlight Cover
Protects lights and
keeps them clean.
Front flips up and velcro to the backside when in
use.
The padded front flap easily installs over the
light with two quick release buckles located under the spot light.
$32
Camo Pattern
Heavy
nylon strap gun sleeve openings make it easy to insert the
gun case.
Two storage pockets are located under the gun
sleeves. They hold lots of gear.
Two Gun Deluxe (two pouches and accessory sleeve )
These new generation gun sleeves free up valuable space in
your boat. Easy access from in or outside the boat for your guns,
flagging poles and other accessories that need storage.
Easily removed during off season, but most customers leave them in
the boat for fishing rods, running light pole, oar, and push pole
storage.
This easy, quick and convenient space saver storage system
attaches to the side of your boat. It has place for two guns in cases, a
rear pouch for oar, push pole and running light pole. Plus under the guns
are two concealed zipper storage pouches that will hold all the
accessories in this photo and more.
Installs in minutes and eliminates the need for aluminum
gun boxes, plus does not take up any floor space.
500 denier heavy duty cover
Plastic (patent pending) sleeve opening
60" twin gun
Half-inch high density foam backing pad
Screws in place (self tapping easy-install gunnel
screws included)
Camo Max-4 or Breakup. (Max-4 shown)
$64
Accessories, the Benelli Black Eagle and Browning Gold are not included.
Large size 17 X 13 X 6 (Lowe's 58 piece tool kit fits inside)
Snaps into side for easy access.
Stays clean, away from muddy floor
Additional inside, outside and front storage pockets
for calls, keys, glasses
hand warmers, flashlight, registration, etc.
500 denier heavy duty polyester construction
Carrying strap for use as blind bag. So nice,
our staff uses
the bag as a briefcase
$32
Camo Pattern
Trampoline quality mesh is sewn into the bottom of the bag to allow water to
drain. One bag mounted on each side of the boat allows you to walk
between the bags for easy access in, out and around your boat.
The tack allows you to see the
full throttle engine RPM. This is useful in order to determine if the boat and motor have
the correct prop. For example a good motor and prop match
will net 3800 to 3900 rpm
under
load. If your motor runs under 3700 RPM, you could use a smaller
prop. If over 4000 perhaps you could use a larger prop, or your
prop is worn down.
Mounts on all motor models.
Screw it to the front of the motor and wrap the
red pickup lead around the spark plug wire and it shows the RPM
when running and hours when the engine is turned off.
Tachs now have Mud Buddy name imprinted on
the front.
A great way to keep your longtail mud motor tailshaft from walking
around inside the boat.
Easy
to install, just set
in place, lower skeg into mount, drill hole, and add the pin.
Marine construction.
Mounting hardware and self- tapping screws included.
$29
Ever leave your boat
lights on?
This is a must.
Don't ever get stranded with a dead battery again.
Installs in
less than 15 minutes - simple 1,2,3 installation. One red
wire to battery, connect your battery cable to the top of
the battery minder, and one small ground wire - that simple
and easy. (comes with both screw or lug battery cable
connector.)
Battery Minder
How it works. If you leave
your lights on, the battery